TSL Approved
Tweezers 648SA General Purpose Straight 6"/150mm
(No reviews yet)
Write a Review
- SKU:
- TS648SA
Description
The 648.SA from Ideal-Tek is an anti-magnetic anti-acid stainless steel general purpose tweezer. This tweezer is handcrafted to have perfect tip symmetry and balance along with polished edges and superior no-scratch/antiglare satin finish. It contains from 16.5 to 18.5 wt% chromium and has important quantities of nickel and molybdenum as additional alloying elements. This tweezer is generally used where corrosion resistance and toughness are primary requirements. It is used by electronic industry, watchmakers, jewellers, microscopy, laboratory and medical applications in moderately aggressive chemical environments.
- Overall length is 6" (150mm), strong, fine, alignment pin, serrated tips and grips
- Low carbon austenitic steel (material number 1.4435, DIN X2CrNiMo18-14-3, AISI number 316L)
- Non-magnetizable
- Good corrosion resistance to most chemicals, salts and acids
- Annealed state, 8.0g/cm³ density, <=215 hardness HB30, 79 hardness rockwell B
- 500 to 700Mpa tensile strength (ultimate), 290 tensile strength (yield), <=200Mpa 0.2% yield stress
- 40% elongation, break and 200Gpa modulus of elasticity
- Specific heat capacity is 0.50J/(g·K), thermal conductivity is 15W/(m·K)
- Continues use temperature is 350°C and maximum service temperature is 925°C
- Resistivity is 0.75 E-4 ohm.cm
Related Products
On Sale
Pyramex CorXcel General Purpose MicroFoam Nitrile Glove Pack 12
Pyramex Safety
Now:
$57.32
Was:
$67.43
Now:
$46.60
Was:
$54.82
15 gauge nylon and spandex liner (silicone free).
Tear and abrasion resistant.
Foam nitrile absorbs oil to increase grip.
Additional foam coating acts like a sponge to help increase gripping power...
On Sale
Pyramex Poly-Torq General Purpose PU Glove (12 Pairs)
Pyramex Safety
Now:
$22.00
Was:
$25.88
Now:
$17.89
Was:
$21.04
13 gauge nylon liner.
Tear and abrasion resistant.
Low particulate shed.
Grips well without being sticky.
Offers tactile sensitivity and dexterity.
Specifications:
Abrasion Rating:...
Bernstein ESD plastic precision tweezers set VARIO 6 pcs
Bernstein
$298.42
$242.62
incl. dissipative tool holder 10^5 ohm
for setting up or hanging (wall mounting Ø 6 mm)
8 slots Ø 9 mm, 140 mm tool fitting
TWEEZERS conductive 10^3 to 10^5 ohm (material Vestamid PA12 L-Polyamide...
Bernstein Titanium tweezers
Bernstein
$34.67 - $54.46
$28.19 - $44.28
Tweezers made of titanium material are antimagnetic, corrosion-resistant, acid- and chemical resistant, antibacterial, highly conductive, glare-free, solder repellent, heat resistant (melting point...
On Sale
Padre VDE 1000V Isolated Hacksaw Frame 6"/150mm
Padre
Now:
$46.83
Was:
$78.03
Now:
$38.07
Was:
$63.44
Electricians Pliers 150mm
Keiba
$30.77
$25.02
Long nose pliers with side cutters, crimpers and wire strippers
Length; 150mm
Ega Master VDE Insulated Tweezers
EGA Master
$46.92 - $51.66
$38.15 - $42.00
Code
Type
Length
E73040
Straight Tip
End Plastic Cutters 150mm
Keiba
$55.85
$45.41
Developed for cutting plastics
These cutters are not suitable for cutting metal products
Coil springs affixed as standard
End flat blades
Angled Plastic Cutters 150mm
Keiba
$64.70
$52.60
Developed for cutting plastics.
These cutters are not suitable for cutting metal products
Coil springs affixed as standard angled flat blades